Are you seeing oil stains on the concrete on your garage floor or driveway? Before you seal, seal, or resurface concrete, it is important to remove any oil. You must remove oil from concrete before applying decorative treatments. It can seep back into the concrete if it doesn’t get removed. This problem can be avoided by removing oil stains from concrete.
Concrete surfaces may be heavily contaminated by oil and grease stains in some cases. In other cases, however, small spots or spillages can be left. The difficulty of removing oil stains will depend on the size and age of the stain. You may need to experiment to determine the best way to remove oil from concrete.
There are concrete stain remover available online to remove grease and oil. Below, we will talk about the various ways to remove grease and oil from concrete.
1. Commercial Degreasing Products
It is easy to apply liquid formulation products. Apply the product to the stain, and let it soak for 15-30 minutes. Use a bristle scrub brush to get rid of the oil.
It may take a few uses of the product before oil stains are entirely removed. Make sure you have enough products to keep going.
If you’re using a strong commercial-grade degreaser you might want to use a brush or a broom to remove the stain.
To ensure that area is clean and as thorough as possible, you may want to use a pressure washer. The spray must be moved in an even manner around the area, keeping the distance between the concrete and the nozzle at all times. This will prevent streaking and marks from forming on concrete surfaces.
2. Baking Soda
Simply sprinkle the baking soda all over the stain, and let it rest for around fifteen minutes. To make a paste, apply dish soap to the surface. Finally, scrub the stain with a stiff brush for several minutes.
To avoid scratching concrete, scrub it in a circular motion. Rinse thoroughly. If necessary, repeat this process.
3. Cat Litter
Spread a generous amount of cat litter on the affected area, along with any oil drops that may be visible. To grind the particles in, you can use your shoes or the back end of a shovel. Be careful not to damage concrete.
Allow the oil to sit for between 10 and 12 hours to absorb the stain. You can then safely dispose of the cat litter using a trowel, shovel, or scraper. You should see a slight difference in the size of the stain if it isn’t completely removed.
Cat litter can be applied repeatedly to remove a stain. However, it may take some time before it completely disappears.
4. Coca-Cola
Coca-Cola is a refreshing beverage on hot days. It is also great for cleaning concrete and other household purposes. Take a glass of soda and then go to the problem area.
You should make sure that Coca-Cola is completely covered by applying a generous amount of it. Next, apply a generous amount of dishwashing detergent to the surface and scrub it with a bristle brush for several hours.
Mixing Coca-Cola’s acid with dishwashing soap detergent should lift and dissolve the oil molecules in concrete. This will allow you to rinse it off when finished scrubbing.
5. Laundry Detergent
Apply powdered laundry detergent liberally to the oil stain.Sprinkle a little water over the mixture to form a paste but not enough to make it liquid. It is important to only add small amounts of water to prevent the ratio from getting out of control. Powdered laundry detergent absorbs water very quickly so it is best to use small amounts of water.
Once the paste is ready, take your scrub brush out and sweep the stain with it in circular motions. Let the paste sit for a few hours before wiping it off.
